Manual - TEDDY Chair

What's Included:

When you receive your TEDDY Chair, you will receive the following:

  • 1 box with 1x1 meter base
  • 1 box with one corner cushions
  • 1 box with metal bars


Please ensure that you have received all parts before starting assembly.

Metal bars

Before assembling your chair, you need to prepare the metal bars. The metal bar system is designed for easy assembly by simply screwing the small straight metal pipes onto the ends of the main metal bars. Once you’ve done this for all of them, the metal bars are ready to use. For the Teddy Chair, you will receive pipes in two different lengths. This also means that if you’ve accidentally screwed a pipe of the wrong length onto a metal bar, you can simply unscrew it and switch it with the correct one.

Assembly and place the metal bars as follows:

  • Small bars on two connecting sides (with one short leg on each bar)
Image description not available

Note: The thread is not fixed to the metal pipes and can move between the large and small pipes when unscrewing them. However, this does not affect the function of the metal bars.

Image description not available

How to assemble the sofa

  1. Arrange the metal bars as described above in the area where you want to place your chair.
  2. Place the base on top of the metal bars. Make sure to place it with the part where the top and bottom of the base are sewn together facing outwards. This makes it easier to flip open when converting the chair into a large bed.
  3. You can now adjust the metal bars, so they fit snugly around the base.
  4. Place the corner cushions at the corner with the metal bars.
  5. Ta-da – your chair is now ready!

From chair to bed:
To convert your chair into a bed, simply flip the base open. The base is connected within the cover, so it won’t slide apart.

From Sofa to Bed

To convert your sofa into a bed, simply slide the top mattress down and place it in front of the bottom mattress. To prevent the mattresses from sliding apart, you can connect them using the velcro pieces included with your sofa. Here’s how:

Image description not available

Protecting your floor
As with any piece of furniture, it is your responsibility to protect your floors. We do not cover any damage caused to flooring by our products. Therefore, we always recommend using felt pads under the metal bars — just as you would with other furniture.

If you have slippery floors or have placed your sofa on a smooth surface, the metal bars may slide a bit during use. To address this, we offer an anti-slip product called Teddy Grip, which can be ordered separately to help keep the bars securely in place.

As an added benefit, Teddy Grip also provides extra floor protection – a convenient two-in-one solution.

Please note: That the metal bars sliding a bit is a rare occurrence, but the solution is available if needed.

Maintenance
Want to keep your new sofa looking its best? Visit our maintenance page for all the tips you need: Maintenance and cleaning.

Product specifications
Mattresses: Cold foam

  • Foam Density: T30.
  • Foam Elasticity: ILD 45


Cushions: Silicone ball fiber in a black inner fabric sleeve

Metal bars: chrome-plated steel 

Fabric:

  • 90% polyester, 10% nylon
  • Martindale: 35,000
  • Color fastness to light: 4-5 


Certifications: All parts of the mattresses and cushions are Oeko-Tex certified, ensuring high standards of environmental friendliness and safety.